 1. Pre inspection - before starting the
cleaning process, your upholstery is thoroughly inspected, paying close
attention to any concerns you may have. Fabrics are tested for colour fastness. |
 5. Agitation – the preconditioning solution is then agitated into your
upholstery using a horse hair brush to ensure even distribution and assist in
soil separation. |
 2. Vacuuming – by using a powerful vacuum with the finest filters
available, we are able to remove the dry dust, dirt and hair from your
upholstery. |
 6. Hot water extraction – HOT water is now used to rinse the
soils and extract them from your upholstery. By using HOT water we
achieve maximum soil removal, require less water, achieve fast drying times and
are able to sanitise your upholstery. At this stage a conditioner is used to
leave your upholstery feeling soft. |
 3. Drop sheets – drop sheets are used to protect your floor coverings
during our cleaning process. |
 7. Spot removal – specific cleaning solutions are applied to stubborn
spots that were not removed in the above process to assist in their removal. |
 4. Preconditioning – a specially formulated HOT preconditioning
solution is applied to your upholstery to break down the soils, oils and bio
– pollutants and to ensure maximum removal of these contaminants. |
 8. Grooming
– a professional brush is used to reset the pile which also
assists in reducing drying time.
|
|
|
